| Question by: |
Karl 06/12/2011 23:52:15 |
| Question: |
hi prof i,ve just fitted the wheels to my hotshot and i,ve noticed there is a bit off play(especially the rear)if you grab both rears say you can pull them apart by say 1mm per side.
is this normal?
the play is coming from the wheel axle(MR14).i,ve checked i,ve got the drive shafts(front and rear).
tightening the wheels more will not help as the play is between the axle head(where drive shaft sits and the BD7 2x10mm shaft.
with the wheel off you can feel/see the play on the axle if you pull/push it.
is this normal?
im using bearings all round as well.
also one rear and front wheel look like they are not running as true as the other 2 wheels as well will this cause problems?
cheers Karl |
|
